Approximately 6in long wrist strap

1.75in Soft enamel pins with epoxy

Please refer to my Pin Grading Guidelines for what to expect for your pins!

Approximately 18in long lanyard

4in Acrylic charm with each piece being 2in hanging charm!

*Dont forget to remove the film!*

Matte 100lb cover paper

Prints are at least 5in wide OR 7in long

4 x 6in Sticker sheet

Note: These stickers are water resistant, but not waterproof!

Approximately 18in long lanyard

Approximately 18in long lanyard

Adult sized face mask with a pocket on the inside for filters, also comes with 2 free filters!

2.5in Acrylic charm with a 1in hanging charm with glitter epoxy

NOTE: Due to an error from my manufacturer, this charm may come with a pink or a bright green key ring instead of the one in the picture!

*Dont forget to remove the film!*

2 1/4in buttons

2in Soft enamel pins with epoxy

Please refer to my Pin Grading Guidelines for what to expect for your pins!

3in Acrylic charm with a 1in hanging charm with glitter epoxy

*Dont forget to remove the film!*

Matte 100lb cover paper

Prints are at least 5in wide OR 7in long

4 x 6in Sticker sheet

Note: These stickers are water resistant, but not waterproof!

Matte 100lb cover paper

Prints are at least 5in wide OR 7in long

3in Acrylic charm with glitter epoxy

*Dont forget to remove the film!*

Approximately 18in long lanyard

2.5in Acrylic charm with a 1in hanging charm with glitter epoxy

*Dont forget to remove the film!*